Ruggedcom RUGGEDBACKBONE RX5000 Bedienungsanleitung PDF herunterladen (Seite 38)

Chapter 5

EMI And Environmental Type Tests

RuggedBackbone™ RX5000

Installation Guide

Test Description Test Levels

Severity

Levels

A.C. Power ports

2.5kV common, 1kV

diff. mode@1MHz

Signal ports 30V Continuous, 300V for 1s 4

IEC 61000-4-16 Mains Frequency Voltage

D.C. Power ports 30V Continuous, 300V for 1s 4

IEC 61000-4-17

Ripple on D.C.

Power Supply

D.C. Power ports 10% 3

Signal ports 2kVAC (Fail-Safe Relay output) N/A

D.C. Power ports 1.5kVDC N/AIEC 60255-5 Dielectric Strength

A.C. Power ports 2kVAC N/A

Signal ports 5kV (Fail-Safe Relay output) N/A

D.C. Power ports 5kV N/AIEC 60255-5 H.V. Impulse

A.C. Power ports 5kV N/A

RuggedCom-specified severity levels

Table 16: IEEE 1613 (C37.90.x) EMI Immunity Type Tests

Test Description Test Levels

Enclosure Contact +/-2kV, +/-4kV, +/- 8kV

IEEE C37.90.3 ESD

Enclosure Air +/-4kV, +/-8kV, +/-15kV

IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m

Signal ports +/- 4kV @ 2.5kHz

D.C. Power ports +/- 4kV

A.C. Power ports +/- 4kV

IEEE C37.90.1 Fast Transient

Earth ground ports +/- 4kV

Signal ports 2.5kV common mode @1MHz

D.C. Power ports 2.5kV common, 1kV diff. mode@1MHzIEEE C37.90.1 Oscillatory

A.C. Power ports 2.5kV common, 1kV diff. mode@1MHz

Signal ports 5kV (Fail-Safe Relay output)

D.C. Power ports 5kVIEEE C37.90 H.V. Impulse

A.C. Power ports 5kV

Signal ports 2kVAC

D.C. Power ports 2kVDCIEEE C37.90 Dielectric Strength

A.C. Power ports 2kVAC

Meets Class 2 requirements for an all fiber configuration. Class 1 for copper ports.

Table 17: Environmental Type Tests

Test Description Test Levels

IEC 60068-2-1 Cold Temperature Test Ad -40°C, 16 Hours

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Ruggedcom RUGGEDBACKBONE RX5000 Bedienungsanleitung Seite 38

Kommentare zu diesen Handbüchern