Ruggedcom RUGGEDBACKBONE RX5000 Bedienungsanleitung PDF herunterladen (Seite 25)

RuggedBackbone™ RX5000

Installation Guide

Chapter 3

Installation

DC Power Supply Wiring 19

Each RX5000 Power Module is equipped with a Phillips screw terminal block (Figure 20) for main power

connection. The Phillips Screw Terminal Block has Phillips screws with compression plates, allowing either bare

wire connections or crimped terminal lugs. We recommend the use of #6 size ring lugs to ensure secure, reliable

connections under severe shock or vibration. The terminal block has a safety cover which must be removed

via two Phillips screws before connecting any wires. The safety cover must be reattached after wiring to ensure

personnel safety.

CAUTION!

A permanently connected RuggedBackbone™ RX5000 must have a readily accessible disconnect

device incorporated external to the equipment.

WARNING!

The RX5000 may have two (2) power supplies installed and be supplied from multiple power sources.

Service personnel must isolate both power supplies prior to servicing.

Figure 20: RX5000 Power Connector

Table 2: RX5000 Power Connector Pinout

Pin Function

Live

Ground

Neutral

Section 3.2.1

DC Power Supply Wiring

Figure 21: DC Power Connection

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Keine Kommentare

Ruggedcom RUGGEDBACKBONE RX5000 Bedienungsanleitung Seite 25